Heating of engineering and building structures. The heating cable is flexible and suitable for heating objects of complex geometry. Can be easily wrapped around hard-to-reach areas.

The heating cables are used for heating of:

• Air conditioning systems
• Evaporators and condensate trays
• Doorways of cooling chambers
• Pipes and valves (anti-frosting)
• Electric motors of fans and pumps
• Roofs, drains, ramps (anti-icing and protection from snow accumulation)
• Underfloor heating
• Greenhouses, aquariums, terrariums
• Incubators
• Sterilizers
• Containers for cosmetics, food

The resistive cable is easy to install. Once connected, it can be hidden under finishing and decorative panels.

The standard cable cross-section is 6,5×4,5mm. The cable with a diameter of 3.5mm is available for applications that require increased flexibility.

Before use, the heating cable can be cut into pieces multiple to 500mm. The ends of the pieces must be sealed with shrink wrap. The cable sections are connected to each other by special connectors.

A version with a mono output is available: It is used for condensate drain EHC.

The heating cable is supplied in bobbins.

The heating element of the cable is a resistive wire wound between two conducting cores. The phase and neutral wires are covered with a protective silicone/PVC sheath.

The heating element of the cable is a resistive wire wound between two conducting cores. The phase and neutral wires are covered with a protective silicone/PVC sheath.

The load is uniformly distributed along the cable length. The heat transfer depends on the current flowing and the segment length.
The cable external insulation is protected with a braided metal mesh. It works as a ground connection and improves the heat distribution in the cable.

• Specific power: 10-60W/m
• Operating voltage: 12-230V
• Operating temperature: -50..200⁰C
• Cable diameter: 6, 5×4, 5/3.5mm
• Bending radius: >15mm
• Metal braid: on request

To select a suitable heating cable model, please, leave a request to our specialist. In the request, describe the task that you need to solve

A rotary type electromechanical device is used for switching and manual selection of the operating mode of electrical equipment.
Rotary switches are used in household and industrial AC and DC devices at a voltage of up to 600 Volts. The component does not have its own power consumption.
Four/five-position switches are used in the production of:

• Heat curtains
• Fan heaters
• Heat guns
• Electric stoves
• Gas stoves

The switches have a compact size. The wear-resistant mechanism is assembled in a dielectric housing made of fire-resistant polyamide/bakelite.

• Each position is switched by a metal axis in steps: 90° – 4-position switch / 72° – 5-position switch
• Rated current and voltage: 16A-250VAC / 10A-400VAC
• Operating life: 10,000 cycles
• Dielectric housing made of polyamide/bakelite
• Shaft length: 19mm
• The gap between the open contacts of one pole is 3mm
• Current-carrying elements: copper alloy
• Contacts: silver-containing alloy
• Operating temperature: <150 °C
• Humidity: up to 85%
  

To select a suitable model, please, leave a request to our specialist. Describe the task you need to solve and specify the required batch size.

The switch is used to turn on/off the power supply. The light indicator located in the key provides visual information on the operating mode of the equipment.
The switches are used in the production of equipment and household appliances:

• Refrigerators
• Heat curtains
• Ovens
• Electric stoves
• Microwaves
• Dishwashers
• Vacuum cleaners
• Heaters

• Rated voltage and current: 6A-250VAC / 9A — 125VAC / 16A-250VAC / 21A — 125VAC
• Operating life: 10,000 cycles
• Resistance <20 MΩ
• IP protection
• Polyamide dielectric housing
• Polycarbonate key
• Current-carrying elements: brass
• Contact material: silver-containing alloy
• Fire protection class UL94 V-2. Can withstand 350 ⁰C for a short time
• Operating temperature: -60 — +85 °C
• Humidity up to 85%

The key switch can be manufactured in a water-proof housing. Explosion-proof design is available.

To select a suitable model, please, leave a request to our specialist. Describe the task you need to solve and specify the required batch size.