Import outsourcing

PVC resin

Suspension PVC resin for the extrusion and injection molding production.

Plastic is synthesized by the polymerization of vinyl chloride. The reaction product is pure. It is characterized by narrow molecular weight distribution and low branching.

Categories: , Tag:

APPLICATION

PVC resin is a raw material for the production of rigid (viniplast) and plasticized materials. The polymer is processed into finished products by extrusion, pressing, and injection molding.

Adding plasticizers, pigments, and UV-stabilizing additives to the PVC resin allows flexible adjustment of the properties of the produced plastic.

PVC resin is used in the production of:

  • Solid products (sheets, pipes, fittings)
  • Seals, gaskets
  • Cables (insulation of electrical conductors)
  • Panels of windows and doors
  • Stretch ceiling
  • Linoleum and floor coverings
  • Washable wallpaper
  • Protective coatings for facilities with chemical and radiation hazards: landfills, disposal areas, nuclear power plants, etching and electrolysis baths
  • Special medical containers
  • Chlorinated vinyl chloride with Tinfl=482⁰C
  • Composite plastics PVC+ABS
  • Packaging (cans, bags, containers)
  • Artificial leather
  • Vinyl platters
  • Films for printing, stickers
  • Banner fabric
  • Showcases
  • Films
  • Hoses

FEATURES

PVC is easily machined (cutting, pressing), welded, glued to wood, concrete, or metal.

PVC products are safe for human health when used as intended. PVC is a thermoplastic, i.e. it softens when heated. The operating temperature of rigid PVC products should not exceed 80⁰C. Plasticized PVC should be used at a lower temperature.

PVC resin is a fine white powder. It is supplied in bags of 25kg.

The resin obtained by the suspension method differs from other production methods in the purity. Suspension PVC is characterized by narrow molecular weight distribution and a low degree of branching of the polymer. The resin has low water absorption, higher thermal and light resistance compared to emulsion PVC.

  • Density: 1.34-1.43g/cm3
  • Bulk density: 0.4-0.7g/cm3
  • Whiteness: 70-75%
  • Mass fraction of volatile substances and moisture: <0.5%
  • Tensile strength: 400-600kgf/cm2
  • Bending strength: 800-1200kgf/cm2
  • Frost resistance: up to-15⁰C
  • Melting/decomposing temperature: 100-140°C
  • Glass transition temperature: 70-80°C (heat-resistant grades – up to 105 °C)
  • Thermal conductivity: 0.159 W/m•K.
  • Tensile strength at break: 40-50MPa
  • Bending strength at break: 80-120MPa
  • Electrical resistivity: 1012-1013Ohms•m
  • Dielectric permittivity (at 50 Hz): 3.5
  • Soluble: cyclohexanone, dichloroethane, THF, DMFA
  • Slightly soluble: benzene, acetone
  • Resistant to acids, alkalis, salt solutions, oils, alcohols
  • Insoluble: water, alcohols, hydrocarbons

PVC products have low gas permeability, high mechanical and electrical insulation properties.

PVC plastics are chemically and weather-resistant. The estimated service life of PVC products is >100 years. For outdoor use, UV stabilizers are added to the plastic.

PVC does not support burning in the absence of a flame. The plastic can be recycled multiple times.

GRADES

Grade Analog in Russia Application Key features
SG1 С-7459 Materials for electrical insulation, cable plastic, films К value: 75-77
SG2 С-7459 Materials for electrical insulation, cable plastic, films К value: 73-74
SG3

 

СИ-70, С-7056,

С-7058, С-7059

Light- and heat-resistant cable plastic, medical plastic, film materials, artificial leather, high-strength pipes, window reveals, window sills К value: 70-72

Bulk density: 0.40-0.45g/cm3

Residue after sieve No.0315: <2,0-8,0%

Residue after sieve No.0063: >80-90%

Number of transparent dots: <10-40pcs/400cm3

Plasticizer absorption mass: >25-26g/100g

SG4

 

СИ-70, С-7059 Industrial films, pipes К value: 69-70
SG5 СИ-67 Water and sewer pipes, window reveals, drip strips, window profiles, window sills, wall panels, siding К value: 66-68

Bulk density: 0.40-0.45g/cm3

Residue after sieve No.0315: <2,0-8,0%

Residue after sieve No.0063: >80-90%

Number of transparent dots: < 20-40pcs/400cm3

Plasticizer absorption mass: >20-24g/100g

SG6

 

СИ-64, С-6346,

С-6358, С-6359,

С-6370, С-6388

Linoleum, artificial leather, films, profiles, panels К value: 63-65
SG7 С-5868 Thin-walled profile and mouldings, wall panels, cable channels, linoleum, artificial leather, films, polymer containers К value: 60-62

Bulk density: 0.42-0.50g/cm3

Residue after sieve No.0315: <2,0-8,0%

Residue after sieve No. 0063: >30-90%

Number of transparent dots: <30-90pcs/400cm3

Plasticizer absorption mass: >12g/100g

SG8 С-5868 Thin-walled profile and mouldings, wall panels, cable channels, linoleum, artificial leather, films, polymer containers К value: 55-59

Bulk density: 0.40-0.50g/cm3

Residue after sieve No.0315: <2,0-8,0%

Residue after sieve No. 0063: >85-95%

Number of transparent dots: <30pcs/400cm3

Plasticizer absorption mass: >12g/100g

 

SELECTION

To select the suitable grades of suspension PVC resin, please, leave a request to our specialist.